Melting Point Apparatus

Melting Point Apparatus

Melting Point Apparatus

By RADICAL SCIENTIFIC EQUIPMENTS PVT. LTD. 14 January 2014 @ 8:08am

The apparatus is used for determination of melting points upto 350 degrees. The mounted block is illuminated from below by a lamp fixed in its housing. The aluminium block accepts three capillary tubes and mercury thermometer. The temperature is regulated by regulator fitted to the unit. The lamp provides uniform and shadow less image.

Technical Specifications:

Maximum Temperature                    :               350 °

Wattage                                       :               125 W

Power Supply                                :              220V , 50HZ

Operating Procedure:

•             Connect the mains to 220 V AC.

•             Insert the thermometer and capillary tube filled with compound whose

                melting point is to be determined in the holes at the top of aluminium

                block.

•             Switch on the light switch and observe the melting point from the

                magnifying lens provided in the front of aluminium block.

•             Select the heating rate from heater selector switch high or low.

.•            Switch on the energy regulator by rotating its knob, red indicator glows.

•             Fix the knob position at maximum i.e. 100. When the desired

                temperature is attainded, reverse the regulator knob slowly.

•             When the indicator goes off, leave the regulator at that position , this

                maintains the desired temperature.

•             Fix the knob position at maximum i.e. 100. When the desired

                temperature is attainded, reverse the regulator knob slowly.

•             When the indicator goes off, leave the regulator at that position , this

                maintains the desired temperature.

Embed this page on your site

Show embedded page in full layout